End Assemblies (Temporary Fence End Posts),
Corner Posts and Parts

End Assemblies are impressivey strong, optional anchoring points for temporary fence ends - they are a great brace for Release Hook, Pulley or Corner use (Release Hooks let go of polywire after a series of deliberate pulls from up to 400m away - saving the usual hike there and back to untie before winding in).

Design your own taller Tread-ins and End Assemblies that can take 4+ wires (e.g. for goat or horse temporary fencing) using Kiwitech's temporary fencing system parts.

All Kiwitech fibreglass posts are hand friendly, U.V. paint coated for long life.
All End Assemblies and Corner Posts are sold in 'kitset' form, requiring assembly (this enables you to set clip and pedal heights to suit).

This div is required to make the 'x ADDED" flash that occurs after an item is added to the cart VIA AJAX

End Assembly with 9mmx1000mm fibreglass posts

End Assemblies are constructed using Anchor and Stay Fibreglass Posts that utilise Pedals with long 7mm steel pins for extra grip. Correctly assembled and planted, End Assemblies tolerate surprising loads for a couple of posts. When erecting straight fences, wire up Release Hooks to enable "one pass only" faster, more efficient temporary fencing.

adf

  • 1 Wire End Assembly (1)
    1 Wire End Assembly (1) - large image

    FK1 END

    1 Wire End Assembly (1)

    $16.71 NZD (GST incl)

  • 2 Wire End Assembly (1)
    2 Wire End Assembly (1) - large image

    FK2 END

    2 Wire End Assembly (1)

    $20.36 NZD (GST incl)

  • 3 Wire End Assembly (1)
    3 Wire End Assembly (1) - large image

    FK3 END

    3 Wire End Assembly (1)

    $24.00 NZD (GST incl)

Pulley End Assemblies

Looking to put up short (200m), 2 or 4 wire temporary fences with a hand winder? Then a Pulley End Assembly is recommended as the polywire starts and terminates at the same fence end, saving Release Hook wiring time and the weight of a second Spool. Additonaly sharp corners can be incorporated in the fence.

  • Pulley End Assembly (Pulleys must be tied onto a Wedge Clips using customer supplied cable tie or twine.)
    Pulley End Assembly (Pulleys must be tied onto a Wedge Clips using customer supplied cable tie or twine.) - large image

    FK2 PULEND

    Pulley End Assembly
    (Pulleys must be tied onto a Wedge Clips using customer supplied cable tie or twine.)

    $36.29 NZD (GST incl)

D.I.Y (Design It Yourself) Parts

Need taller Tread-ins and End Assemblies or more than 3 wires? Make your own using these components.

  • Release Hook (Designed to work with Kiwitech polywire - may not function with other branded polywire. Requires a Single Wedge to lock on fibreglass.)
    Release Hook (Designed to work with Kiwitech polywire - may not function with other branded polywire. Requires a Single Wedge to lock on fibreglass.) - large image

    FA RELHK

    Release Hook
    (Designed to work with Kiwitech polywire - may not function with other branded polywire. Requires a Single Wedge to lock on fibreglass.)

    $3.38 NZD (GST incl)

  • Pulley (Usually tied onto a Wedge Clip using customer supplied cable tie or twine.)
    Pulley (Usually tied onto a Wedge Clip using customer supplied cable tie or twine.) - large image

    FA PUL

    Pulley (Usually tied onto a Wedge Clip using customer supplied cable tie or twine.)

    $10.93 NZD (GST incl)

  • Pedal Bare (Requires a Single Wedge to lock on fibreglass)
    Pedal Bare (Requires a Single Wedge to lock on fibreglass) - large image

    FA PDBARE

    Pedal Bare
    (Requires a Single Wedge to lock on fibreglass)

    $1.55 NZD (GST incl)

  • Pedal Short (Requires a Single Wedge to lock on fibreglass)
    Pedal Short (Requires a Single Wedge to lock on fibreglass) - large image

    FA PDSH

    Pedal Short
    (Requires a Single Wedge to lock on fibreglass)

    $2.40 NZD (GST incl)

  • Pedal Long (Requires a Single Wedge to lock on fibreglass)
    Pedal Long (Requires a Single Wedge to lock on fibreglass) - large image

    FA PDLG

    Pedal Long
    (Requires a Single Wedge to lock on fibreglass)

    $2.96 NZD (GST incl)

Visit "Fibreglass Posts" and "Clips" pages for the other essential components.